Aqua Cart Replacement Parts

This durable rubber tire is 18" tall and 9.5" wide. It is designed for hard packed terrain. Includes heavy duty bushing.

This durable rubber tire is 18" tall and 9.5" wide. It is designed for hard pack terrain.

This large durable rubber tire is 21" tall and 12" wide. It is designed for hard or soft pack terrain. This is the tire you need for soft terrain situations. The tire is a thick 4-ply rubber that is air filled. Includes heavy duty bushing.

This large durable rubber tire is 21" tall and 12" wide. It is designed for hard or soft pack terrain. This is the tire you need for soft terrain situations. Tire is a thick 4-ply rubber.

A 1 7/8 coupler attachment allows you to tow your 4-play at a low speed. Built with a high weight capacity ( coupler rated at 2000 lb.)

A 2" coupler on the Aquacart 4-Play will allow you to pull the cart easier at a low speed. It is a strong Class 2 coupler rated at 3500 lbs.

This handle stand is ideal to support a 4-Play handle when transporting in a trailer. This allows you to tie-down the front of the cart while giving another support point.

8" composite rim. These come standard with the upgraded heavy duty bushings already installed.

A 1 7/8 coupler attachment allows you to tow your Beach Blaster at a low speed. Built with a high weight capacity ( coupler rated at 2000 lb.)

A 2" coupler on the Aquacart Beach Blaster will allow you to pull the cart easier at a low speed.

A winch kit for the Beach Blaster does include a 12 foot nylon strap with hook.

1" ID composite bearing for all uses, including salt water usage. This style makes replacing warn out bearings easy.

These new metallic wheel bushings are a heavier duty than the stock composite bushings. If you have been wearing out the stock black composite bushings, these will make your day!

These new metallic wheel bushings are a heavier duty than the stock composite bushings. If you have been wearing out the stock black composite bushings, these will make your day!

This extension will push the handle out 9" away from the axle to accomodate a heavier PWC with a 4 stroke motor. This will allow the PWC to slid onto the cart further. It does include a stainless steel lockpin.

900 lb winch with handle. A commonly used ratio of boat size to winch capacity is 2 to 1. Example: a 2200lb boat requires 1100 lb winch. The winch is capable of holding a 15' strap.

2" wide x 12 long winch strap. It comes with a hook and a self locking safety latch. An additional loop underneath is attached so the hook doesn't contact the boat.

This is a great addition to your 4-Play when using a winch to pull the cart. The aluminum frame telescopes into the front of the handle.

This front wheel helps when bringing a cart up into a trailer. It will raise the handle giving clearance with the ramp. It includes a stainless steel wire lock pin as well as a 13" pneumatic tire assembly

5" diameter Polyolefin caster mounted on a heavy guage steel frame with ball bearings for 360 degree swivel.